It is backward compatible with other interfaces, such as HDMI and DVI, through the use of either active or passive adapters. ĭisplayPort was designed to replace VGA, FPD-Link, and Digital Visual Interface (DVI). It can also carry audio, USB, and other forms of data. It is primarily used to connect a video source to a display device such as a computer monitor. ^ a b Pins 13 and 14 may either be directly connected to ground or connected to ground through a pulldown device.ĭisplayPort connector A DisplayPort port (top right) near an Ethernet port and a USB portĭisplayPort ( DP) is a digital display interface developed by a consortium of PC and chip manufacturers and standardized by the Video Electronics Standards Association (VESA).^ a b c d e f g h This is the pinout for source-side connector, the sink-side connector pinout will have lanes 0–3 reversed in order i.e., lane 3 will be on pin 1(n) and 3(p) while lane 0 will be on pin 10(n) and 12(p).and 30/20 pins for internal connections between graphics engines and built-in flat panels.ġ.62, 2.7, 5.4, 8.1, or 20 Gbit/s data rate per lane 1, 2, or 4 lanes (effective total 5.184, 8.64, 17.28, 25.92, or 77.37 Gbit/s for 4-lane link) 2 or 720 Mbit/s (effectively 1 or 576 Mbit/s) for the auxiliary channel. Optional, maximum resolution limited by available bandwidthĢ0 pins for external connectors on desktops, notebooks, graphics cards, monitors, etc. Optional 1–8 channels, 16 or 24-bit linear PCM 32–192 kHz sampling rate maximum bitrate 36,864 kbit/s (4,608 kB/s)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |